產品型號：TM-L05PT-E
應用范圍：:照明、指示、背光等
產品描述：台銘直插式LED,體積小,高亮度,能耗低,應用於照明,背光等領域。
產品介紹注：亮度、角度、色溫、紫光波段均可按客戶要求做貨。
| Type 規格/型號 | Emitting Color 顔色 | Material 原材料 | View Angle 發光角度 | VF(V) 電壓 | IV (MCD) 亮度 | WL(nm) 波長 | IF(MA） 電流 | |||
| Typ | Max | Min | Typ | Min | Max | |||||
| TM-L05PTO-E （紅光） | Red | AlGaInP | 110° | 1.8 | 2.4 | 200 | 400 | 620 | 630 | 20MA |
| TM-L05PTO-E （橙光） | Orange | AlGaInP | 110° | 1.8 | 2.4 | 200 | 400 | 600 | 610 | 20MA |
| TM-L05PTY-E （黃光） | Yellow | AlGaInP | 110° | 1.8 | 2.4 | 150 | 350 | 585 | 595 | 20MA |
| TM-L05PTPG-E （黃綠） | Yellow Green | AlGaInP | 110° | 1.8 | 2.4 | 150 | 350 | 565 | 575 | 20MA |
| TM-L05PTCG-E （翠綠） | Green | InGaN/GaN | 110° | 2.8 | 3.4 | 250 | 400 | 520 | 530 | 20MA |
| TM-L05PTB-E （藍光） | Blue | InGaN/GaN | 110° | 2.8 | 3.4 | 200 | 400 | 460 | 475 | 20MA |
| TM-L05PTZG-E （紫光） | Purple | InGaN/GaN | 110° | 2.8 | 3.4 | --- | --- | 365 | 420 | 20MA |
| TM-L05PTW-E （白光） | White | InGaN/GaN | 110° | 2.8 | 3.4 | 1200 | 2000 | 2500 | 21000 | 20MA |
Supporter shaping：
Shaping of the supporter must be conducted before welding.While shaping, the
bending position of the supporter must at least be locatedat 3mm from the bottom
of the encapsulating resin. Also, avoid multiplebending on the sameposition。 Please
choose the
appropriate apparatus to fixate the supporter inorder to avoid exerting extra pressure
on resin. Using the jointing section of the pin andresin as fulcrum is strictly
prohibited since the pressure mounted would directlydamage the internal 。
illuminating structure and thus cause irreversibledefection of the product..Due to the
same reason, the interval between the welding holeon the PCB board should be
strictly matched with the pin interval of theproduct when assembling the product.
