產品型號：TM-L05RGB-E
應用范圍：護欄管、發光家具、鼠標鍵盤、軟光條、點光源、水族燈、
產品描述：本產品主要應用於各類使用表面貼裝結構的電子產品中，如汽車儀表盤的照明，LED顯示屏的組成單元等。本產品也廣泛用於各類室內外的裝飾照明。
產品介紹注：發光顏色、亮度、色溫均可按客戶要求做貨。
| Type 規格/型號 | Emitting Color 顏色 | Material 原材料 | View Angle 發光角度 | VF(V) 電壓 | IV (MCD) 亮度 | WL(nm) 波長 | IF(MA） 電流 | |||
| Typ | Max | Min | Typ | Min | Max | |||||
| TM-L05RGB-E （全彩RGB） | Red | AlGaInP | 30° | 1.8 | 2.4 | 2000 | 3000 | 620 | 630 | 20MA |
| Green | IGaN/GaN | 2.8 | 3.4 | 6000 | 8000 | 520 | 530 | |||
| Blue | IGaN/GaN | 2.8 | 3.4 | 1000 | 1500 | 460 | 475 | |||
| TM-L05RGB-E （紅、藍、黃三色） | Red | AlGaInP | 30° | 2.8 | 3.4 | 2000 | 3000 | 620 | 630 | 20MA |
| Blue | IGaN/GaN | 2.8 | 3.4 | 1000 | 1500 | 460 | 475 | |||
| Yollow Green | AlGaInP | 1.8 | 2.4 | 300 | 500 | 565 | 575 | |||
| TM-L05OGB-E (橙、翠綠、藍三色） | Orange | AlGaInP | 30° | 1.8 | 2.4 | 300 | 500 | 600 | 610 | 20MA |
| Green | IGaN/GaN | 2.8 | 2.4 | 6000 | 8000 | 520 | 530 | |||
| Blue | IGaN/GaN | 2.8 | 3.4 | 1000 | 1500 | 460 | 475 | |||
Supporter shaping：
Shaping of the supporter must be conductedbefore welding. While shaping, the
bending position of the supporter must at least be located at3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending onthe same position。 Please
choose the
appropriate apparatus to fixate the supporter in order toavoid exerting extra pressure
on resin. Using the jointing section of the pin and resin asfulcrum is strictly
prohibited since the pressure mounted would directly damagethe internal 。
illuminating structure and thus cause irreversible defectionof the product..Due to the
same reason, the interval between the welding hole on the PCBboard shouldbe
strictly matched with the pin interval of theproduct when assembling theproduct.
