NILAMID® A2HH M25
Polyamide 66
Nilit Plastics
25% 矿物填料
产品说明：
NILAMID® A2 HH M25 is a low viscosity Polyamide 66 (Nylon 66)compound, 25% mineral filled and high heat stabilized.
This compound is intended for injection molding.
NILAMID® A2 HH M25 is primarily designed for the Automotiveindustry. It is also suitable for Electrical and Electronic orIndustrial & Consumer applications.
| 基本信息 | |
|---|---|
| 填料/增强材料 |
|
| 添加剂 |
|
| 特性 |
|
| 用途 |
|
| 加工方法 |
|
| 密度 (23°C) | 1.35 | g/cm³ | ISO 1183 |
| 收缩率 | ISO 294-4 | ||
| 垂直流动方向 :23°C | 0.90 | % | ISO 294-4 |
| 流动方向 :23°C | 0.70 | % | ISO 294-4 |
| 吸水率 | ISO 62 | ||
| 23°C, 24hr | 1.2 | % | ISO 62 |
| 饱和, 23°C | 6.5 | % | ISO 62 |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 简支梁缺口冲击强度 | ISO 179/1eA | ||
| -30°C | 3.0 | kJ/m² | ISO 179/1eA |
| 23°C | 4.0 | kJ/m² | ISO 179/1eA |
| 简支梁无缺口冲击强度 | ISO 179/1eU | ||
| 23°C | 30 | kJ/m² | ISO 179/1eU |
| 30°C | 25 | kJ/m² | ISO 179/1eU |
| 悬壁梁缺口冲击强度 | ISO 180/A | ||
| -30°C | 3.5 | kJ/m² | ISO 180/A |
| 23°C | 4.0 | kJ/m² | ISO 180/A |