原产原包 Grilamid PA12 XE 3795 符合ROHS 认证
聚酰胺树脂，英文名为1olyamide,简称PA。俗称尼龙（Nylon），它是大分子族链重复单元含有酰胺基团的高聚物的总称。为五大工程原料中产量大，品种多，用途广的品种。主要的品种有尼龙6，尼龙66，尼龙11，尼龙12，尼龙610，尼龙612，尼龙46，尼龙1010等，其中尼龙6，尼龙66产量大，约占尼龙产量的90%以上。尼龙11和尼龙12具有低温韧性。尼龙46具有优异的耐热性而得到迅速发展，尼龙1010是以蓖麻油为原料的我国的特有品种。
| 性能特点 | 导电性 |
| 外观 | 黑色 |
| 形式 | 颗粒料 |
| 物理性能 | 额定值 | 单位制 | 测试方法 |
| 比重 | 1.08 | g/cm3 | ASTMD792 |
| 收缩率- 流动 | 0.90 | % | ASTMD955 |
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.15 g/cc | 0.0415 lb/in3 | ISO 1183 |
| Water Absorption | 1.1 % | 1.1 % | ISO 62 |
| Moisture Absorption | 0.600 % | 0.600 % | ISO 62 |
| Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 |
| Linear Mold Shrinkage, Transverse | 0.0030 cm/cm | 0.0030 in/in | ISO 294-4, 2577 |
| Mechanical Properties | Metric | English | Comments |
| Ball Indentation Hardness | 130 MPa | 18900 psi | conditioned; ISO 2039-1 |
| Tensile Strength at Break | 140 MPa | 20300 psi | conditioned; ISO 527-1/-2 |
| 150 MPa | 21800 psi | dry; ISO 527-1/-2 | |
| Elongation at Break | 3.5 % | 3.5 % | dry; ISO 527-1/-2 |
| 4.0 % | 4.0 % | conditioned; ISO 527-1/-2 | |
| Tensile Modulus | 13.0 GPa | 1890 ksi | conditioned; ISO 527-1/-2 |
| 15.0 GPa | 2180 ksi | dry; ISO 527-1/-2 | |
| Charpy Impact Unnotched | 6.00 J/cm2 | 28.6 ft-lb/in2 | conditioned; ISO 179/1eU |
| 6.00 J/cm2 @Temperature 30.0 °C | 28.6 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |
| Charpy Impact, Notched | 1.30 J/cm2 | 6.19 ft-lb/in2 | conditioned; ISO 179/1eA |
| 0.800 J/cm2 @Temperature 30.0 °C | 3.81 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 10000 ohm-cm | 10000 ohm-cm | conditioned; IEC 60093 |
| Surface Resistance | 50 ohm | 50 ohm | IEC 60093 |
PC (polycarbonate # bulletproof glue) /303FR-07BRA/ plasticQuanta
Usage: electronic appliance
Important parameters: melt flow rate: 17.5 g/10min density: 1.2g/cm3 notched impact strength: 30 tensile strength: 65 MPa,elongation at break: 80% bending strength: 70 MPa, hot deformationtemperature: 135 DEG C
Manufacturer: quanta engineering plastics factory
PC (polycarbonate # bulletproof glue) /201-15 Qualidux plastic
Uses: other
Characteristics: medium viscosity, high transparency, high gloss,medium mechanical strength
Important parameters: melt flow rate: 15 g/10min density: 1.2 g/cm3notched impact strength: 45 tensile strength: 60 MPa bendingstrength: 80 MPa hot deformation temperature: 130 DEG C lighttransmittance: 82.5%
Manufacturer: quanta engineering plastics factory
PC (polycarbonate # bulletproof glue) /GV-3410R/ Japan Teijin
Uses: other
Important parameters: density: 1.29 g/cm3 water absorption: 0.16%molding shrinkage: 0.4% notched impact strength: 8 bendingstrength: 125 MPa bending modulus: 3800 MPa VEKA softening point:149 degrees of hot deformation temperature: 144 degreescentigrade
Manufacturer: Japan Teijin chemical company
PC (polycarbonate # bulletproof glue) /2071-15/ DuPont dow
Uses: medical grade, food packing
Characteristic note: antibacterial, heat resistant, USP grade
Important parameters: density: 1.2 g/cm3, water absorption: 0.15%,elongation at break: 150% bending strength: 97 MPa bending modulus:2412 MPa VEKA softening point: 154 degrees of hot deformationtemperature: 127 degrees centigrade
Manufacturer: Dow DuPont Co
PC (polycarbonate # bulletproof glue) /H-3001R/ ThailandMITSUBISHI
Uses: other
Characteristic note: high flow
Important parameters: melt flow rate: 30 g/10min density: 1.2 g/cm3absorption rate: 0.24% molding shrinkage rate: 0.6% notched impactstrength and elongation at break: 9: 118%: 93 MPa flexural strengthflexural modulus of 2300 MPa thermal deformation temperature: 122degrees
Manufacturer: Thailand MITSUBISHI Chemical Co., Ltd.
PC (polycarbonate # bulletproof glue) /H112/ Guangzhou Yang
Uses: other
Features: resistance to boiling water, good thread strength.
Important parameters: melt flow rate: 11 g/10min notched impactstrength: 700 tensile strength: 65 MPa, hot deformationtemperature: 135 DEG C
Manufacturer: Guangzhou foreign express engineering factory
PC (polycarbonate # bulletproof glue) /H110F/ Guangzhou Yang
Uses: other
Important parameters: melt flow rate: 11 g/10min notched impactstrength: 700 tensile strength: 65 MPa, hot deformationtemperature: 137 DEG C
Manufacturer: Guangzhou foreign express engineering factory
PC (polycarbonate # bulletproof glue) /B112/ Guangzhou Yang
Uses: other
Features: resistance to boiling water, good thread strength.
Important parameters: melt flow rate: 11 g/10min notched impactstrength: 750 tensile strength: 65 MPa, hot deformationtemperature: 135 DEG C
Manufacturer: Guangzhou foreign express engineering factory
PC (polycarbonate # bulletproof glue) /B110F/ Guangzhou Yang
Uses: other
Important parameters: melt flow rate: 11 g/10min notched impactstrength: 700 tensile strength: 65 MPa, hot deformationtemperature: 137 DEG C
Manufacturer: Guangzhou foreign express engineering factory
PC (polycarbonate # bulletproof glue) /T072/ Guangzhou Yang
Uses: other
Features: impact, toughness good.
Important parameters: melt flow rate: 7 g/10min notched impactstrength: 900 tensile strength: 65 MPa, hot deformationtemperature: 137 DEG C
Manufacturer: Guangzhou foreign express engineering factory