现货 10吨 PA12 UBESTA 3030 JIX44 低密度尼龙12原料 \
UBE宇部PA12 UBESTA® 3030JI44详细物性数据
UBESTA® 3030JI44是宇部公司UBE生产的一种高性能聚酰胺尼龙12材料。UBE UBESTA®尼龙12塑胶原料具有塑料和橡胶之间的灵活性，具有优良的尺寸稳定性，独特的高压爆 破强度，耐候性和抗紫外线性，低密度，低吸湿性，优良的粘附金属性能，同ETFE有极好的粘接性，高耐冲击特性，高抗拉强度，高断裂延伸率，优良的抗裂纹扩展性和耐磨性，优良的耐化学腐蚀性，易加工性（易挤出、注塑、吹塑、滚塑成型）。UBEUBESTA® PA12部分牌号被批准用于食品接触或医疗行业。
UBE宇部PA12 UBESTA®3030JI44主要用途
UBE UBESTA®尼龙12适合用于刚性波纹管，平滑油管，燃油管，真空管，空气制动管，气压管，多层燃油管，无声齿轮，电缆护套，形状复杂零件，食品包装材料，刹车线，离合器线，快速接头，管件，紧固件，夹具，液压软管，刹车管，悬挂管，离合器管，金属管涂层，金属刹车线涂层，金属燃料线涂层，海上钻井平台的柔性衬垫和海上电线电缆、立管、软管，重型卡车和越野车用气压制动系统和液压软管，食品管，医疗设备管，医用气动管及体育运动休闲纺织品运输领域。
UBE UBESTA®3030JI44 Plasticized Industrial Grade Nylon 12
Polymer,Thermoplastic,Nylon,Nylon 12
UBE
产品说明:
Description: UBEUBESTA® Industrial grade Nylon 12
Comments: ultraflexible, low migration
Information provided by UBE.
UBE UBESTA® 3030JI44 Plasticized Industrial Grade Nylon 12物性表
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 1.00 g/cc | 0.0361 lb/in³ | ASTM D792 |
| 熔体流动速率 | 11 g/10 min @Load 2.16 kg, Temperature 235 °C | 11 g/10 min @Load 4.76 lb, Temperature 455 °F | ASTM D1238R |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 肖氏硬度 (邵氏 D) | 50 | 50 | ASTM D2240 |
| 抗张强度(断裂) | >= 30.0 MPa | >= 4350 psi | ASTM D638 |
| 抗张强度(屈服) | 16.0 MPa | 2320 psi | ASTM D638 |
| 伸长率 (断裂) | >= 300 % | >= 300 % | ASTM D638 |
| 弯曲强度 | 10.0 MPa | 1450 psi | ASTM D790 |
| 弯曲模量 | 0.200 GPa | 29.0 ksi | ASTM D790 |
| 悬壁梁缺口冲击强度 | 0.880 J/cm | 1.65 ft-lb/in | ASTM D256 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 熔融温度 | 169 °C | 336 °F | ASTM D3418 |
| 载荷下热变形温度(0.46 MPa) | 101 °C | 214 °F | ASTM D648 |
| 加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 加工温度 | 230 °C | 446 °F | Flange Temperature for T-Die Cast Film Extrusion |
| 进料温度 | 40.0 °C | 104 °F | Injection Molding |
| 1区 | 190 °C | 374 °F | For T-Die Cast Film Extrusion |
| 230 °C | 446 °F | For 8x1 mm Tube Extrusion | |
| 2区 | 210 °C | 410 °F | For T-Die Cast Film Extrusion |
| 225 °C | 437 °F | For 8x1 mm Tube Extrusion | |
| 3区 | 220 °C | 428 °F | For 8x1 mm Tube Extrusion |
| 230 °C | 446 °F | For T-Die Cast Film Extrusion | |
| 4区 | 215 °C | 419 °F | For 8x1 mm Tube Extrusion |
| 模具温度 | 230 °C | 446 °F | For T-Die Cast Film Extrusion |
| 40.0 - 60.0 °C | 104 - 140 °F | Injection Molding | |
| 射速 | 100 mm/sec | 3.94 in/sec | Injection Molding |
| Die Opening | 0.0400 cm | 0.0157 in | For T-Die Cast Film Extrusion |
| Roll Temperature | 50.0 °C | 122 °F | Chill Roll Temperature for T-Die Cast Film Extrusion |
| 干燥温度 | 80.0 °C | 176 °F | Option 1 |
| 100 °C | 212 °F | Option 2 | |
| 110 °C | 230 °F | Option 3 | |
| 干燥时间 | 2 - 4 hour | 2 - 4 hour | Option 3 |
| 4 - 6 hour | 4 - 6 hour | Option 2 | |
| 6 - 8 hour | 6 - 8 hour | Option 1 | |
| 注射压力 | 40.0 - 50.0 MPa | 5800 - 7250 psi | Injection Molding (Injection pressure should be increased whenmolding thin wall parts. Pressure up to 75 bar can be usedhere.) |
| 保压 | 25.0 - 50.0 MPa | 3630 - 7250 psi | Injection Molding |
| 背压 | 5.00 MPa | 725 psi | Injection Molding |
| 螺杆转速 | 15 - 76 rpm | 15 - 76 rpm | For 8x1 mm Tube Extrusion |
| 材料描述 | 测试方法 | |
|---|---|---|
| C/R | 3-3.5:1 | For 8x1 mm Tube Extrusion |
| Calibrating Vacuum | 100 mbar | For 8x1 mm Tube Extrusion |
| Calibration | 9.95 mm | For 8x1 mm Tube Extrusion |
| Compression Ratio | 2.5-3.5:1 | Injection Molding |
| min 3:1 | For 8x1 mm Tube Extrusion | |
| Die Diameter | 16 mm | For 8x1 mm Tube Extrusion |
| Die Width | 300 mm | For T-Die Cast Film Extrusion |
| Extractables | 22% | Tolerance (DIN 73378 EtOH 18hr) 2% |
| Extruder | Barmag, Screw Diameter = 30 mm | For T-Die Cast Film Extrusion |
| Extruder Characteristics | 65 mm screw diameter | For 8x1 mm Tube Extrusion |
| Film Thickness | 60 microns | For T-Die Cast Film Extrusion |
| Flight Depth in the Feeding Zone | 10-15% of Screw Diameter | Injection Molding |
| Flight Depth in the Metering Zone | 5-7% of Screw Diameter | Injection Molding |
| Haul Off Speed | 5 m/min | For T-Die Cast Film Extrusion |
| Haul Speed | 10-55 m/min | For 8x1 mm Tube Extrusion |
| L/D Ratio | 25:1 | For 8x1 mm Tube Extrusion |
| min 20:1 | Injection Molding | |
| Length of Compression Zone | 25-45% of total screw length | Injection Molding |
| 30% of screw length | For 8x1 mm Tube Extrusion | |
| Length of Feeding Zone | 20-40% of total screw length | Injection Molding |
| 30-40% of screw length | For 8x1 mm Tube Extrusion | |
| Length of Metering Zone | 30-45% of screw length | For 8x1 mm Tube Extrusion |
| 35-45% of total screw length | Injection Molding | |
| Mandrel Diameter | 12 mm | For 8x1 mm Tube Extrusion |
| Peripheral screw speed | 10 m/min | Injection Molding |
| Water Temperature | 10-18°C | For 8x1 mm Tube Extrusion |