住友化学PMMA HT013E

日本住友化学PMMA HT013E--In addition to the standard SUMIPEX whichfeatures of transparency, weather resistance and mechanicalstrength, SUMIPEX HT incorporates substantially greater impactstrength. This increased strength functions to reduce the amount ofcracking that might occur, at the time of molding ortransportaion.

除了具有透明度、耐候性和机械强度的标准SUMIPEX外，SUMIPEXHT还具有更大的冲击强度。这增加了强度功能，以减少可能发生的开裂数量，在成型或运输时。

characteristic

Impact resistance, good cracking resistance, good fluidity, goodstrength, good weather resistance

purpose

Protective covering electrical appliances industrial applicationtable products in the field of automobile

特性

抗撞击性，高良好的开裂抵抗良好的流动性良好的强度耐气候影响性能良好

用途

保护性遮盖物电器用具工业应用汽车领域的应用桌类产品

Drying temperature 70.0 to 80.0 ° C

Drying time 4.0 to 6.0 HR

Barrel rear temperature 220 to 250 ° C

Temperature in the middle of barrel 220 to 250 ° C

Drum front temperature 220 to 250 ° C

Mold temperature 70.0 to 80.0 ° C

Injection pressure 58.8 to 137 MPa

干燥温度70.0 到 80.0°C

干燥时间4.0 到 6.0hr

料筒后部温度220 到 250°C

料筒中部温度220 到 250°C

料筒前部温度220 到 250°C

模具温度70.0 到 80.0°C

注塑压力58.8 到 137MPa