K树脂KR03(K胶)
It is widely used in themanufacture of non-fragile transparent products because of itsexcellent transparency, gloss and impact resistance, and its priceis between PS and PC, such as: Cups, lids, bottles, hinged boxes,hangers, food and medical packaging supplies and so on. K Rubber ismade of styrene and Butadiene, polystyrene has high transparency,good processing performance, the disadvantage is brittle, andbutadiene can be polymerized into rubber, with elastic impactresistance, the two copolymerization,
K树脂 KR-01 特性备注:清晰、刚度、韧性、表面光泽度、抗变形。
K树脂 KR-01BR 特性备注:刚度、韧性、变形性、清晰略带蓝色、增强脱模。
K树脂 KR-03 特性备注:清晰、刚度、成形性、韧性、表面光泽度。
K树脂 KR-03NW 特性备注:清晰、刚度、成形性、韧性、表面光泽度。
K树脂 KR-05 特性备注:刚度、韧性、变形性、清晰略带蓝色、增强脱模。
K树脂 KR-05NW 特性备注:清晰、刚度、成形性、韧性、表面光泽高。
K树脂 BK-10 特性备注:清晰、刚度、韧性、表面光泽度。
K树脂 DK-11 特性备注:清晰、表面光泽度、热封性、韧性、刚度。
K树脂 DK-13 特性备注:清晰、表面光泽度、热封性、韧性、高渗透。
K树脂 KK-38 特性备注:清晰、刚度、成形性、韧性、表面光泽度、低温冲击。
K树脂 XK-40 特性备注:清晰和韧性、成形性、表面光泽度。
K树脂 XK-41 特性备注:清晰和韧性、刚度、热稳定性。
K树脂 XK-44 特性备注:清晰、刚度、成形性、韧性、表面光泽度。
K树脂 KR-52 特性备注:光学性能、刚度、印刷适性。
improved the shortcomings of polystyrene,the polymer with good comprehensive properties was obtained. K isan amorphous polymer, good fluidity, and processing out of theproducts, smooth appearance, gloss, high transparency. Suitable forinjection molding, blow molding, extrusion and other processingmethods, can be in most ordinary e processing, do not needto change the e and mold.Expansion Data: Propertiesof K Adhesive 1. Thermal Properties: Because K adhesive is anamorphous polymer, its melting point is not obvious, the thermaldeformation temperature is 77 °C, when the temperature is higherthan 177 °c, the fluidity of the polymer increases, but higher than260 °C, the fluidity becomes unstable, the barrel temperature istoo high, or the residence time is too long in the mediumtemperature, the polymer will degrade, resulting in the appearanceand performance of the products, such as transparency decline,color change, Brittle, etc. . 2. Optical Properties: K is anamorphous polymer, which has less interference with light than adense crystalline polymer. Therefore, the turbidity is very low by1-3% and the transparency is excellent by 89-91% , it is necessaryto improve the surface finish of the die and select the bestprocessing conditions. 4. Chemical Resistance: The ChemicalResistance of K adhesive is poor. Organic compounds such asalcohol, Ketone, Ester, and aromatic compounds will soften and evendissolve the K compound, however, the rate and severity of erosiondepends on the design and storage conditions of the product.Therefore, the compatibility of the actual product with k materialshould be tested. Oh, Shit