阻燃PP-台湾台塑-1124
更多其他型号PP料:
PP 台湾台化 K1011 K1020 K1023 K1035 K2000K4515 K4535 K7005 K8003 K8009 K8025
PP 台湾台化 K8802 F1611 K8010 1005 S1040T8002
PP 台湾新光 4210
PP 宁波台塑 1120
PP 宁波台塑 5090T
台湾台塑 1120 3015 5090T 1005 1040 11242080 3040 3040C FPD943
供应PP 3661-11: 主要特性:MFR=11,FM=18000 特性:薄膜,射出成型;
供应PP PD943: 主要特性:MFR=10.8,FM=18000 特性:吹袋,射出成型;
供应PP HP560P: 主要特性:MFR=12,FM=13100 特性:复丝,地毯纱;
供应PP 3661: 主要特性:MFR=14.5,FM=17200 特性:复丝,射出成型(家电品);
供应PP PT331M: 主要特性:MFR=14.5,FM=20000 特性:射出成型(瓶盖,容器);
供应PP 6231-20: 主要特性:MFR=20,FM=16800 特性:射出成型(瓶盖,容器);
PP(聚丙烯)性能可分类为:均聚级PP,共聚级PP,透明级PP,耐候级PP,高抗冲PP,抗静电PP,高流动PP,阻燃PP,高硬度PP,耐寒PP,吹塑(瓶)PP,薄膜(透明)PP,BOPP(双向延伸)PP,板材级PP,高耐热PP,医用级PP,食品级(FDA)PP,玻璃纤维增强PP,矿物纤维增强PP,高光泽PP,低翘曲PP,耐水解PP,高延伸PP。
PP Properties overview: 1, DENSITY PP is all synthetic resin mediumdensity, small. PP plastic products can be added only main andauxiliary antioxidants, without the need to add ultravioletabsorbent. 2. The tensile strength and rigidity of mechanicalproperties of PP are good, but the impact strength is bad,especially at low temperature. In addition, if there is orientationor stress during the molding process, the impact strength will besignificantly reduced. Although the impact strength is poor, afterbeing filled or reinforced, its mechanical properties can competewith the engineering plastics with high cost in many fields. 3,surface hardness PP surface hardness in five general purposeplastics is low, only better than Pe. When the crystallinity ishigher, the hardness is also increased, but still less than PVC,PS, abs and so on. It has good electrical insulation.