医用、食品级: 大东:【1080AF,1085AF,1095AF,3080AF,3085AF,3090AF】
聚醚型品级:德国巴斯夫:【1185A,1190A,1195A,】
聚酯型品级:德国拜耳:【8798A,B95A,S60AW,S95A,】
耐低温:昆仲:【E359D,E370D,E380A,E385A,E390A,E395A,E398A,】
高流动:大东:【1160D,1180A,1185A,1190A,1195A,】
耐磨级:昆仲:【B460D,B464D,B480A,B485A,B490A,B495A,B498A,】
级:昆仲:【B764D,B768D,B780A,B785A,B790A,B795A,B798A,】【3695AU/德国拜耳】
通用级:大东:【1055D,1055DE,1065D,1075A,1080A,1080AE,1085A,1090A。】
聚脂类良好机械特性,适用于运动鞋底、鞋及机械零件等。
TPU 390X 拜尔代理商肖氏A 硬度:85, B90A 德国巴斯夫 肖氏A 硬度:90,
B95A 德国巴斯夫 肖氏A 硬度:95, B98A 德国巴斯夫 肖氏A 硬度:98,
B60D 德国巴斯夫 肖氏D 硬度:60, S64D 德国巴斯夫 肖氏D 硬度:64,
耐寒特殊聚脂类,适用于鞋底及雪靴等。
TPU C85A 德国巴斯夫 肖氏A 硬度:85, C90A 德国巴斯夫 肖氏A硬度:90,
C95A 德国巴斯夫 肖氏A 硬度:95,
高品质聚脂类,适用于汽车、机械等度要求的产品。
TPU 1175A 德国巴斯夫 肖氏A 硬度:75, 1185A 德国巴斯夫 肖氏A硬度:85,
1190A 德国巴斯夫 肖氏A 硬度:75, 1154D 德国巴斯夫 肖氏D 硬度:54,
1174D 德国巴斯夫 肖氏D 硬度:74,
聚醚类耐水解抗发霉,适用于电线电缆水管等。
TPU 685A 德国巴斯夫 肖氏A 硬度:85, 690A 德国巴斯夫肖氏A 硬度:90,
695A 德国巴斯夫 肖氏A 硬度:95, 660D 德国巴斯夫 肖氏D硬度:60,
664D 德国巴斯夫 肖氏D 硬度:64,
聚酯规格。
服装领域的新一代聚氨脂弹性热封胶带。此种胶带在任何下都能保持良好的弹力、粘性、防水性、柔韧性,其聚氨脂成份决定了它的环保特性,附合出口。特别适用于服装市场。 详细说明:成份: 聚氨脂 颜色:磨砂半 底层: 聚氨脂 厚度:0.08-0.25mm 硬度:98A 软化点: 100℃ 熔点:180℃适宜温度:-20℃-120℃ 加工条件:温度:550℃-580℃ (热风机) 压力:1.5-2kg 速度:10-15m/min成形条件:根据面料的不同,其成形条件有稍微改变。
供应TPU塑胶原料(热塑性聚氨酯弹性体)
免费提供:德国拜耳TPU物性 德国巴斯夫TPU物性优得TPU物性报告等。
TPU 390X 拜尔代理商原料物性描述: TPU胶带是应用于服装领域的新一代聚氨脂弹性热封胶带。此种胶带在任何下都能保持良好的弹力、粘性、防水性、柔韧性,其聚氨脂成份决定了它的环保特性,附合出口。特别适用于服装市场。 详细说明:成份: 聚氨脂 颜色:磨砂半 底层: 聚氨脂 厚度:0.08-0.25mm 硬度:98A 软化点: 100℃ 熔点:180℃适宜温度:-20℃-120℃ 加工条件:温度:550℃-580℃ (热风机) 压力:1.5-2kg 速度:10-15m/min成形条件:根据面料的不同,其成形条件有稍微改变。
供应TPU塑胶原料(热塑性聚氨酯弹性体)
免费提供:德国拜耳TPU物性 德国巴斯夫TPU物性优得TPU物性报告等。
Description: TPU adhesive tape is a new generation of polyurethaneelastic thermal sealing tape used in the field of clothing. Thiskind of adhesive tape can keep good elasticity, viscosity, waterresistance, flexibility under any conditions, its polyurethanecomposition determines its environmental protectioncharacteristics, attached to the export. Especially suitable forthe clothing market. Ingredient: polyurethane color: frothedsemi-bottom: polyurethane thickness: 0.08-0.25mm hardness: 98Asoftening point: 100℃ melting point: 180℃ suitable temperature:-20℃-120℃ processing conditions: temperature: 550℃-580℃ (hot airblower) pressure: 1.5-2kg speed: 10-15m/min forming conditions:according to the different fabric, its forming conditions haveslightly changed.TPU plastic raw material (thermoplasticpolyurethane elastomer)Free: bayer TPU physical property, bayer TPUphysical property, basf TPU physical property, and so on.