典型特性
特 性值单位试验方法
乙酸乙烯酯含量27-29%Wt FTIR(内标法)
熔融指数(190°C/2.16 kg)135-175 g/10分钟ISO 1133/ASTM D1238
密度(23°C)0.95 g/cm3 ISO 1183
熔点69°C ISO 11357-3
维卡软化点(10N)<40°C ISO 306/ASTM D1525
环和球温度95°C ASTM E28/NF EN 1238
断裂伸长率400-600%ISO 527/ASTM D638
断裂抗拉强度8mpa ISO 527/ASTM D638
肖氏硬度A 71-ISO 868/ASTM D2240
应用
EVATAN®23-150的高醋酸乙烯酯含量带来柔软性、柔韧性和极性。
EVATANE®28-150与大多数增粘树脂和蜡相容。加上高流动性,
它是一种高效、易操作的热熔胶配方产品。它也可以用作
原油添加剂(降凝剂)。
有关您的具体申请的详细信息和建议,请联系
你当地的阿科马技术代表。
处理
EVATANE®28-150可以在热塑性塑料的大多数传统设备上加工。它是
建议避免熔体温度超过230°C,并在运行后清洗设备
完整的。
ARKEMA Anonymous公司,资本614 937 940欧元-445 074 685 RCS Nanterre
很好,操作和安全
EVATANE 28-150应储存在标准条件下,并防止紫外线照射。不合适的
储存条件可能导致降解,并可能对
产品。
提供安全数据表以及有关处理和储存依凡烷28-150的信息
如有要求,请联系您的ARKEMA代表或访问网站evatane.com。
保质期
自交货之日起两年,未开封包装。任何超过此限值的用途,请参阅
我们的技术服务。
EVATANE EVA法国阿科玛
良好的柔韧性 ;流动性高 ;柔软 ;无规共聚物
The statements, technical information and recommendationscontained herein are believed to be accurate as of the date hereof.Since the conditions and methods
of use of the product and of the information referred to hereinare beyond our control, ARKEMA expressly disclaims any and allliability as to any results obtained
or arising from any use of the product or reliance on suchinformation; NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE,WARRANTY OF
MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, ISMADE CONCERNING THE GOODS DESCRIBED OR THE INFORMATION PROVIDED
HEREIN.
The information provided herein relates only to the specificproduct designated and may not be applicable when such product isused in combination with other
materials or in any process. The user should thoroughly test anyapplication before commercialization. Nothing contained hereinconstitutes a license to practice
under any patent and it should not be construed as an inducementto infringe any patent and the user is advised to take appropriatesteps to be sure that any
proposed use of the product will not result in patentinfringement. See SDS for Health & Safety Considerations. Arkemahas implemented a Medical Policy regarding
the use of Arkema products in Medical Devices applications thatare in contact with the body or circulating bodily fluids:
Arkema has designated Medical grades to be used for such MedicalDevice applications. Products that have not been designated asMedical grades are not authorized
by Arkema for use in Medical Device applications that are incontact with the body or circulating bodily fluids. In addition,Arkema strictly prohibits the use of any
Arkema products in Medical Device applications that areimplanted in the body or in contact with bodily fluids or tissuesfor greater than 30 days. The Arkema
trademarks and the Arkema name shall not be used in conjunctionwith customers' medical devices, including without limitation,permanent or temporary implantable
devices, and customers shall not represent to anyone else, thatArkema allows, endorses or permits the use of Arkema products insuch medical devices.
It is the sole responsibility of the manufacturer of the medicaldevice to determine the suitability (including biocompatibility) ofall raw materials, products and components,
including any medical grade Arkema products, in order to ensurethat the final end-use product is safe for its end use; performs orfunctions as intended; and complies with
all applicable legal and regulatory re (FDA or othernational drug agencies) It is the sole responsibility of themanufacturer of the medical device to conduct all
necessary tests and inspections and to evaluate the medicaldevice under actual end-use re and to ade adviseand warn purchasers, users, and/or learned
intermediaries (such as physicians) of pertinent risks andfulfill any post market surveillance obligations. Any decisionregarding the appropriateness of a particular Arkema
material in a particular medical device should be based on thejudgment of the manufacturer, seller, the competent authority, andthe treating physician.
Any claim relating to defects or non-compliance of the productsshall be valid only if it is sent to Arkema in writing withinfifteen (15) calendar days following delivery
of the Product.