供货地区
北美洲 ;拉丁美洲 ;欧洲 ;亚太地区
8150 physical property table
Product description
Engage? 8150 polyolefin elastomer is a kind of ethylene octenecopolymer, which has excellent flow characteristics. It will havesuper impact resistance after blending with polypropylene (PP) andpolyethylene (PE). It is widely used in thermoplastic olefin TPOapplications re excellent low-temperature impact resistance.Engage 8150 has the ability of high content of filler and excellentperoxide curing. After curing by peroxide, silane and irradiation,the product will have excellent thermal aging performance,compression deformation and weather resistance, which can be usedto make high-performance electrical insulation products. Maincharacteristics: excellent flow characteristics of granularmaterials can improve the impact resistance of polypropylene andpolyethylene after adding high amount of fillers can be cured byperoxide, silane and irradiation and have excellent thermal agingperformance, compression deformation and weather resistanceapplication fields: general purpose thermoplastic elastomer impactresistant modified thermoplastic polyolefin (TPO) wire andCable
population
Material status commercially available: currently valid
Data 1 Technical Datasheet
Search for UL yellow card Dow plastics
Supply area North America; Latin America; Europe; AsiaPacific
Formal particle
Test method for unit system of physical performance rating
Density / specific gravity 0.868 g / cm? ASTM D792
Melt flow rate (melt flow rate) (190 ° C / 2.16 kg) 0.50 g / 10min ASTM d1238
Mooney viscosity (ml 1 + 4, 121 ° C) 33 Mu ASTM d1646
Test method of hardness rating unit system
Shore hardness
Shore A, 1 second, molding 70 ASTM D2240
Shore D, 1 second, molding 20 ASTM D2240
Test method for unit system of mechanical performance rating
Tensile modulus - secant 2 (Molding) 2.60 MPa ASTM D638
Tensile strength 2 (fracture, molding) 9.50 MPa ASTM D638
Elongation 2 (fracture, molding) 810% ASTM D638
Flexural modulus
1% secant: molding 15.2 MPa ASTM D790
2% secant: molding 14.4 MPa ASTM D790
Test method for unit system of elastomer rating
Tear strength 3 37.3 kn / M ASTM d624
Test method of thermal performance rating unit system
Glass transition temperature - 52.0 ℃ internal method
Vicat softening temperature 46.0 ℃ ASTM d1525
DSC 4 55.0 ℃ internal method
POE美国陶氏8150总代理商
