PP台湾李长荣PD943 吹袋(薄膜)
弯曲模量18500兆帕 熔流率（熔体流动速率）：10.8
台湾李长荣化学华南分销商，我司长期经营李长荣聚丙烯(PP)全系列。
6331 7533 ST868M等牌号，所有牌号均可订货，均可含税。
TITANPRO® PD943
Polypropylene Homopolymer
Lotte Chemical Titan (M) Sdn. Bhd.
产品说明：
Polypropylene homopolymer. The baseresin meets the requirements of the U.S. Food and DrugAdministration as specified in 21 CFR 177.1520(a)(1)(i) and(c)1.1a. The adjuvant meet their respective FDA regulations and 21CFR 177.1520(b). In summary, this resin meets the FDA criteriacovering safe use of polyolefin articles and component of articlesintended for food contact use. TSCA Registry: CAS# 9003-07-0
APPLICATIONS:
Bags for hosiery, shirts and other textiles and food packaging forfresh fruits and produce.
Characteristics:
Good optical properties, excellent stiffness and high slipdevelopment and good openability.
FABRICATION:
Equipment -general water quench blown film machines and techniques- standard processing. Extrusion and water bath conditions can bevaried to obtain the desired optical and mechanical filmproperties.
物性信息：
| 基本信息 | |
|---|---|
| 特性 |
|
| 用途 |
|
| 机构评级 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 0.900 | g/cm³ | ASTM D1505 |
| 熔流率（熔体流动速率） (230°C/2.16 kg) | 11 | g/10 min | ASTM D1238 |
| 吸水率 (24 hr) | 0.020 | % | ASTM D570 |
| 硬度 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 洛氏硬度 (R 级) | 94 | ASTM D785 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 抗张强度 (屈服) | 35.3 | MPa | ASTM D638 |
| 伸长率 (屈服) | 12 | % | ASTM D638 |
| 弯曲模量 | 1670 | MPa | ASTM D790B |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 悬壁梁缺口冲击强度 (23°C) | 32 | J/m | ASTM D256A |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 载荷下热变形温度 (0.45 MPa, 未退火) | 95.0 | °C | ASTM D648 |
