PC日本住友化学总代理商

PC日本住友化学301-06

 PC日本住友化学301-10

 PC日本住友化学301-15  

 PC日本住友化学301-22

 PC日本住友化学301-22

 PC日本住友化学301-30

 PC日本住友化学301-4

 PC日本住友化学301-40

 PC日本住友化学301V-10

 PC日本住友化学302-4

 PC日本住友化学303-06

 PC日本住友化学303-10

 PC日本住友化学303-15

 PC日本住友化学303-22

 PC日本住友化学875-20

 PC日本住友化学FD5021H

 PC日本住友化学IR5131V  

 PC日本住友化学LD-2050M

 PC日本住友化学LR8031V  

 PC日本住友化学SD2201W  

 PC日本住友化学ST5131V  

 PC日本住友化学ST5301L  

 PC日本住友化学ST5301V

 PC日本住友化学TR1501A  

 PC日本住友化学TR1501A

PC has good mechanical properties, but poor flowcharacteristics, making the injection molding process of thismaterial more difficult. When selecting PC materials of whatquality, the final expectations of the product should be taken asthe benchmark. If the plastic parts require high impact resistance,then use PC materials with low flow rates; On the contrary, PCmaterials with high flow rates can be used to optimize theinjection molding process.

PC plastic raw material is a new type of thermoplastic, with atransparency of 90%, and is known as a transparent metal. It isrigid and has toughness, high impact strength, high dimensionalstability, and a wide range of operating temperatures. It has goodelectrical insulation performance, heat resistance, andnon-toxicity, and can be molded by injection or extrusion. PCplastic has excellent thermal properties and can be used for a longtime between -100 ℃ and 130 ℃, with a embrittlement temperaturebelow -100 ℃.

Although polycarbonate has poor resistance to cracking and drugresistance, is prone to hydrolysis at high temperatures, has poorcompatibility with other resins, and has poor lubricationperformance, it can be modified by adding other resins or inorganicfillers to achieve excellent performance.