PP台湾台塑1120

Triax® 1120

Acrylonitrile Butadiene Styrene + Nylon

INEOS Styrolution Group GmbH

产品说明：

Triax 1120 resin is an ABS (Acrylonitrile ButadieneStyrene)/Nylon 6 alloy for injection molding. It is asemicrystalline thermoplastic with excellent processibility, goodchemical resistance, good fatigue performance, and excellentabrasion characteristics. Triax 1120 resin exhibits a good balanceof impact strength and flow properties.

Typical applications include housings, shrouds and handles forcomponents of lawn and garden equipment, power tools, appliances,and sporting goods. Automotive applications include fasteners andinterior functional components, housings, and shrouds. As with anyproduct, use of Triax 1120 resin in a given application must betested (including but not limited to field testing) in advance bythe user to determine suitability.

物性信息：

基本信息
黄卡编号

E44741-235663

特性

半结晶

抗撞击性，良好

可加工性，良好

良好的流动性

良好耐磨损性

耐化学性良好

耐疲劳性能

用途

把手

草坪和园林设备

动力/其它工具

家电部件

紧固件

汽车领域的应用

体育用品

外壳

机构评级

EC 1907/2006 (REACH)

形式

粒子

加工方法

注射成型

多点数据

Isochronous Stress vs. Strain (ISO 11403-1)

Isothermal Stress vs. Strain (ISO 11403-1)

Secant Modulus vs. Strain (ISO 11403-1)

Shear Modulus vs. Temperature (ISO 11403-1)

Viscosity vs. Shear Rate (ISO 11403-2)

物理性能干燥调节后的单位制测试方法比重1.061.06g/cm³ASTM D792特定体积0.9400.940cm³/gASTMD792收缩率 - 流动1.01.0%ASTM D955吸水率


ASTM D570     23°C,24 hr1.11.1%ASTMD570     饱和,23°C4.34.3%ASTM D570硬度干燥调节后的单位制测试方法洛氏硬度 (R 级)10590
ASTM D785机械性能干燥调节后的单位制测试方法拉伸模量2030--MPaASTMD638抗张强度 (屈服)43.440.0MPaASTMD638伸长率 (断裂)140290%ASTMD638弯曲模量20701170MPaASTM D790弯曲强度 (屈服)75.256.9MPaASTMD790冲击性能干燥调节后的单位制测试方法悬壁梁缺口冲击强度


ASTM D256     -40°C,3.18 mm8080J/mASTMD256     -40°C, 6.35mm6975J/mASTM D256     23°C, 3.18 mm800800J/mASTMD256     23°C, 6.35mm750750J/mASTM D256装有测量仪表的落镖冲击


ASTM D3763     -40°C, 2.54 mm, Total Energy47.559.7JASTMD3763     23°C, 2.54mm, Total Energy42.048.8JASTMD3763热性能干燥调节后的单位制测试方法载荷下热变形温度


ASTM D648     0.45MPa, 未退火, 3.18 mm90.087.8°CASTMD648     0.45 MPa,未退火, 6.35 mm97.296.1°CASTMD648     1.8 MPa,未退火, 3.18 mm65.062.2°CASTMD648     1.8 MPa,未退火, 6.35 mm73.972.2°CASTM D648维卡软化温度197170°CASTMD1525 1线形热膨胀系数 - 流动


ASTM D696     -40 到22°C9.9E-51.1E-4cm/cm/°CASTMD696     22 到83°C1.5E-41.4E-4cm/cm/°CASTM D696RTI Elec (1.57 mm)110110°CUL 746RTI Imp (1.57 mm)65.065.0°CUL 746RTI (1.57 mm)105105°CUL746电气性能干燥调节后的单位制测试方法表面电阻率8.3E+153.2E+13ohmsASTMD257体积电阻率 29.7E+159.0E+12ohms·cmASTMD257介电强度 3(23°C, 1.57 mm,in Oil)1715kV/mmASTMD149介电常数 4(1MHz)3.503.50
ASTM D150耗散因数 5(1MHz)0.0240.039
ASTM D150可燃性干燥调节后的单位制测试方法UL 阻燃等级


UL 94     1.57mmHBHB
UL 94     3.18mmHBHB
UL 94光学性能干燥调节后的
测试方法Gardner光泽度


ASTM D523     20°7878
ASTM D523     60°9191
ASTM D523注射干燥单位制
干燥温度87.8°C
干燥时间2.0 到 4.0hr
建议的Zui大水分含量0.15 到 0.35%
建议注射量50 到 70%
建议的Zui大回制料比例20%
料筒后部温度232 到 266°C
料筒中部温度232 到 266°C
料筒前部温度232 到 266°C
射嘴温度249 到 260°C
加工（熔体）温度238 到 271°C
模具温度37.8 到 65.6°C
注塑压力41.4 到 82.7MPa
注射速度快速

背压0.345 到 0.689MPa
锁模力4.1 到 6.9kN/cm²
垫层< 3.18mm
螺杆长径比20.0:1.0