ARLEN™E630N
Polyamide 6T
Mitsui Chemicals, Inc.
30% 玻璃纤维增强材料
产品说明：
ARLEN™ E630N by Mitsui Chemicals is a modified polyamide 6Treinforced with 30% glass fiber. Possesses high dimensionalstability, high melting point, high rigidity and minimum waterabsorption. Exhibits good chemical and heat resistance. Is suitablefor processing by injection molding. ARLEN™ E630N is recommendedfor electrical & electronic parts including connectors, jacks,switches and power supply terminals. Complies with UL 94 V-0 flamerating.
Features:
High dimensional stability
High melting point
High rigidity
Minimum water absorption
Good chemical and heat resistance
Flame retardant
Applications:
Electrical and electronic parts including: connectors, jacks,switches, and power supply terminals.
物性信息：
| 基本信息 | |
|---|---|
| 填料/增强材料 |
|
| 添加剂 |
|
| 特性 |
|
| 用途 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 比重 | 1.58 | g/cm³ | ASTM D792 |
| 收缩率 | ASTM D955 | ||
| 流动 | 0.20 | % | ASTM D955 |
| 横向流动 | 0.80 | % | ASTM D955 |
| 吸水率 (23°C, 24 hr, 65%r.h) | 2.1 | % | ASTM D570 |
| 硬度 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 洛氏硬度 (M 级) | 100 | ASTM D785 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 抗张强度 | 210 | MPa | ASTM D638 |
| 伸长率 (断裂) | 6.0 | % | ASTM D638 |
| 弯曲模量 | 12500 | MPa | ASTM D790 |
| 弯曲强度 | 275 | MPa | ASTM D790 |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 悬壁梁缺口冲击强度 | 100 | J/m | ASTM D256 |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 载荷下热变形温度 (1.8 MPa, 未退火) |
