ISO527-20.40
拉伸模量23°CISO527-29100Mpa拉伸应变断裂,23°CISO527-22.2%拉伸应力断裂,23°CISO527-2132Mpa弯曲模量23°CISO1788300Mpa弯曲强度23°CISO178193Mpa热性能测试条件测试方法测试结果单位RTIElec0.40mmUL74665.0°C0.75mmUL746130°C1.5mmUL746130°C3.0mmUL746130°CRTIImp0.40mmUL74665.0°C0.75mmUL74665.0°C1.5mmUL74695.0°C3.0mmUL74695.0°CRTIStr0.40mmUL74665.0°C0.75mmUL746110°C1.5mmUL746110°C3.0mmUL746110°C热变形温度0.45MPa,未退火ISO75-2/B250°C1.8MPa,未退火ISO75-2/A230°C熔融温度
ISO11357-3250°C线形热膨胀系数MD：23to55°C,2.00mmISO11359-22E-05cm/cm/°CTD：23to55°C,2.00mmISO11359-21E-04cm/cm/°C电气性能测试条件测试方法测试结果单位高电弧燃烧指数(HAI)0.75mmUL746PLC0
1.5mmUL746PLC0
高电压电弧起痕速率3.00mmUL746PLC3
漏电起痕指数3.00mmIEC60112250to399V耐电弧性3.00mmASTMD495PLC6
热丝引燃(HWI)0.75mmUL746PLC0
1.5mmUL746PLC0
冲击性能测试条件测试方法测试结果单位简支梁无缺口冲击强度-30°CISO179/1eU35kJ/m²23°CISO179/1eU40kJ/m²可燃性测试条件测试方法测试结果单位UL阻燃等级1.5mmUL94V-05VA
3.0mmUL94V-05VA
0.40mmUL94V-0
0.75mmUL94V-0
极限氧指数
ISO4589-232%热灯丝点火温度0.40mmIEC60695-2-13930°C0.75mmIEC60695-2-13750°C1.5mmIEC60695-2-13750°C3.0mmIEC60695-2-13800°C灼热丝易燃指数0.40mmIEC60695-2-12960°C0.75mmIEC60695-2-12960°C1.5mmIEC60695-2-12960°C3.0mmIEC60695-2-12960°C
