Latistat67-08
Polyamide 66
LATI S.p.A.
产品说明：
Dissipative product based on Polyamide 66 (PA 66),toughened.
物性信息：
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|
| 密度 | 1.16 | g/cm³ | ISO 1183 |
| 收缩率 1 |
|
| ISO 294-4 |
| 垂直流动方向 : 2.00mm | 1.3 到 1.6 | % | ISO 294-4 |
| 流动方向 : 2.00mm | 1.3 到 1.7 | % | ISO 294-4 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|
| 拉伸模量 (23°C) | 2300 | MPa | ISO 527-2/1 |
| 拉伸应力 (断裂, 23°C) | 50.0 | MPa | ISO 527-2/5 |
| 拉伸应变 (断裂, 23°C) | 15 | % | ISO 527-2/5 |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|
| 简支梁缺口冲击强度 (23°C) | 7.5 | kJ/m² | ISO 179/1eA |
| 简支梁无缺口冲击强度 (23°C) | 无断裂 |
| ISO 179/1eU |
| 悬壁梁缺口冲击强度 (23°C, 3.20 mm) | 75 | J/m | ASTM D256A |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|
| 热变形温度 |
|
|
|
| 0.45 MPa,未退火 | 185 | °C | ISO 75-2/B |
| 1.8 MPa,未退火 | 65.0 | °C | ISO 75-2/A |
| 维卡软化温度 | 190 | °C | ISO 306/B50 |
| 电气性能 | 额定值 | 单位制 | 测试方法 |
|---|
| 表面电阻率 | 3.0E+5 | ohms | ASTM D257 |
| 体积电阻率 | 3.0E+5 | ohms·cm | ASTM D257 |
| 注射 | 额定值 | 单位制 |
|
|---|
| 干燥温度 | 90.0 到 100 | °C |
|
| 干燥时间 | 3.0 | hr |
|
| 加工（熔体）温度 | 260 到 290 | °C |
|
| 模具温度 | 60.0 到 80.0 | °C |
|
| 注射速度 | 中等 |
|
|
| 备注 |
|---|
| 1 . | at 60 Mpa of cavity pressure |
We ought to repay as well because friendship is reciprocal.Friendship is about tolerance. We can’t expect our friends to beflawless because no one is perfect. We should be magnanimous enoughto accept some of their shortcomings, which they endeavor hard butfail to get rid of. Friendship is about forgiveness. They shouldn’tbe considered as bad friends even if they do something wrong to us.We are supposed to listen calmly and even-temperedly to their wordsas well as accept
