IEC 60684-2-2011 Flexible insulating sleeving等同于GB/T7113.2
需根据样品具体信息(比如材质、用途、制成工艺等)定测试项目和时间
Measurementsof boreSection3.12壁厚（纺织护套）
Wall thickness for textilesleevingSection3.23*小/*大壁厚及偏心率（挤出成型的护套）
Minimum/maximum wall thickness and concentricity forextruded sleevingSection3.34密度
DensitySection45耐热胀裂
Resistanceto splitting after heatingSection56热冲击
HeatshockSection67耐热焊
Resisitanceto sodering heatSection78无涂层编织玻璃护套的热失重
Loss in mass on heating of uncoated textlie glasssleevingSection89长度变化
LongitudinalchangeSection910压重变形率
Deformationunder loadSection1011PVC护套的热稳定性
Thermal stability of PVC sleevingSection11
ISO 182-1 & ISO182-212有机硅护套的挥发份含量
Volatile content of siliconesleevingSection1213热弯测试
Bendingafter heatingSection1314低温弯曲测试
Bendingat low temperatureSection1415脆化温度
BrittlenesstemperatureSection 15
ISO97416储存尺寸稳定性（热收缩管）
Dimensional stability on storage (heat shrinkagesleeving only)Section1617涂层水解性
Hydrolysisof coatingSection1718挤出成型护套的柔韧性
Flexibility (extruded sleevingonly)Section1819全剖面护套的拉伸强度和断裂伸长率
Tensile strength and enlongation at break forfull-section sleevingSection19.220哑铃型样条的拉伸强度和断裂伸长率
Tensile strength and enlongation at break on dumb-bellspecimensSection19.321无涂层的玻璃纺织护套的拉伸强度
Tensile strength of uncoated glass textilesleevingSection19.4222%伸长率下的割线模量
Secant modulus at 2% elongationSection19.523****伸长率下的拉伸应力
Tensile stress at **** elongationSection19.624升温下的****伸长率下的拉伸应力
Tensile stress at **** elongation and at elevatedtemeratureSection19.725抗磨损测试
Frayingresistance testSection2026击穿电压（圆轴及薄膜电极）
Breakdown voltage (straight mandrel test, 100mm foilelectrode)Section21.227击穿电压（裁样）
Breakdown voltage (cut-out specimens for large-sizesleeving)Section21.328击穿电压（升温）
Breakdown voltage (test at elevatedtemperature)Section21.429击穿电压（湿热）
Breakdown voltage (test after dampheat)Section21.530绝缘性测试（室温）
Insulation resistance (test at roomtemperature)Section22.4.231绝缘性测试（升温）
Insulation resistance (test at elevatedtemperature)Section22.4.332绝缘性测试（湿热）
Insulation resistance (test after subjection to dampheat conditions)Section22.4.433体积电阻率（室温）
Volume resistvity (test at roomtemperature)Section23.5.234体积电阻率（升温）
Volume resistvity (test at elevatedtemperature)Section23.5.335体积电阻率（湿热）
Volume resistvity (test after subjection to damp heatconditions)Section23.5.436介电常数和耗散因子
Permittivity and dissipationfactorSection2437漏电起痕
Resistanceto trackingSection 25
IEC60587 method 2 (criterionA)38火焰蔓延测试（A法）
Flame propagation tests (Method A)Section26.2.239火焰蔓延测试（B法）
Flame propagation tests (Method B)Section26.2.340火焰蔓延测试（C法）
Flame propagation tests (Method C)Section26.541室温氧指数
Oxygenindex at ambient temperatreSection27.1
ISO4589-242高温氧指数
Oxygen index at elevatedtemperatreSection27.243透明度
TransparencySection2844离子不纯度测试
Ionicinpurities testSection29
IEC6058945银污染测试
Sliver staining testSection3046耐电腐蚀测试
Electrolyticcorrosion resistanceSection31
IEC6042647耐腐蚀测试
Corrosion resistanceSection3248铜腐蚀测试
CoppercorrosionSection3349耐光色牢度
Colorfastness to lightSection3450耐臭氧
Resistanceto ozoneSection 35
ISO1431-151耐试剂
Resistanceto selected fluidsSection3652耐热性
ThermalenduranceSection 37
IEC6021653单位长度重量
Mass per unit lengthSection3854热老化
HeatagingSection 39
IEC60216-4-1
IEC60216-4-255吸水性
Water absorptionSection40
ISO 62 Method156受限收缩性
RestrictedshrinkageSection4157耐热色稳定性
Colorstability to heatSection4258烟密度
SmokeindexSection 43
ISO1394359烟毒性
ToxicityindexSection4460卤素含量
HalogencontentSection4561酸性烟气产量
Acidgas genenrationSection46
IEC60754-1
IEC60754-262热**变形
Hot enlongation and hot setSection4763拉伸**变形
TensionsetSection4864撕裂扩展性
TearpropagationSection4965长期热老化
Longterm heat agingSection5066动态剪切（室温）
Dynamic shear at ambienttemperatureSection5167动态剪切（升温）
Dynamic shear at elevatedtemperatureSection5268动态剪切（热冲击及热老化后）
Dynamic shear after heat shock and heatagingSection5369铝转鼓剥离
Rollingdrum peel to aluminiumSection5470铝棒动态剪切
Aluminiumrod dynamic shearSection5571密封性
SealingSection5672T型剥离（两层粘接的热收缩管）
Adhesive T peeling strength of two bondedheat-shrinkagable substratesSection5773径向扩张试验
CircumferencialextensionSection5874耐电压
VoltageproofSection5975热冲击
ThermalshockSection 60
