Elastollan耐磨TPU 1190 A

Elastollan耐磨TPU 1190 A---Processed by extrusion or injectionmolding. Elastollan ® 1100 series products are FDA Sec. 177.2600compliant. Elastollan 1100 series of products are polyether-basedthermoplastic polyurethanes. They exhibit excellent low temperatureproperties, hydrolysis resistance and fungus resistance. Theseproducts can be injection and blow molded and extruded.As with allTPU products this grade must be dried prior to processing.
Property values below are typical values based on test samplescured 20 hours at 100°C before testing. Information provided byBASF Corporation.

TPU 1190 A通过挤出或注塑加工。Elastollan®1100系列产品符合FDASec.177.2600标准。Elastollan1100系列产品是聚醚基热塑性聚氨酯。它们具有优异的低温性能、抗水解性和抗真菌性。这些产品可以注塑、吹塑和挤出。与所有TPU产品一样，该等级必须在加工前干燥。以下特性值是基于试验前在100°C下固化20小时的试样的典型值。巴斯夫公司提供的信息。

TPU 1190 A物性信息：

物理性能	额定值 (公制)	额定值 (英制)	测试方法
密度	1.13 g/cc	0.0408 lb/in³	ASTM D792

机械性能	额定值 (公制)	额定值 (英制)	测试方法
肖氏硬度 (邵氏 A)	91	91	ASTM D2240
肖氏硬度 (邵氏 D)	42	42	ASTM D2240
极限抗拉强度	37.0 MPa	5370 psi	ASTM D412
抗张强度(屈服)	1.70 MPa@Strain 300 %	247 psi@Strain 300 %	ASTM D-412
	10.0 MPa@Strain 100 %	1450 psi@Strain 100 %	ASTM D-412
伸长率 (断裂)	575 %	575 %	ASTM D412
撕裂强度	125 kN/m	713 pli	ASTM D624
泰伯磨损，毫克/1000次	45	45	H-18 wheel; ASTM D-1044.
Tensile Set	75 %	75 %	at break; ASTM D-412