充电桩认证

充电桩产品测试及认证服务

Introduction of Charging Station Testing andCertification Services

安全认证，让充电更安全

Safety approval,make charging safer

随着全球新能源电动车的不断发展，充电桩的需求也与日俱增，越来越多的国产充电桩

企业走向世界各地，而产品也必须满足各个国家和地区的法律法规要求，即需要满足对应的电气安全、电磁兼容、人体防护安全、软件技术安全可靠、数据通信/协议测试，无线和物联网测试，功能安全测试等，为了充电桩的安全可靠性，设计师必须在早期设计阶段将各标准的规范要求纳入考虑，分析和评估可能会遇到的问题，Zui大可能的在设计阶段降低成本和满足认证要求。

With the continued development of Newenergy automobile,increasingly more of charging station has beenapplied to this field in the whole worth,which requies variouscharging station to adapt to the relatedlaws,directives,standards,such as electrical safety,EMC,Safety forPersonnel Protection Systems for Electric Vehicle, Softwarereliability in Programmable Components,communication data safetytesting,and function satety testing.To ensure charging stationreliability,all these related regulations and requirements must betaken into consideration at the early design stage,which will savethe time and money cost for the whole program.

我们的服务

Our services

•       认证咨询：产品开发设计及整改阶段的技术支持；

•       验证试验：按照测试标准的要求，对充电桩进行测试和评估；

•       认证服务：欧洲CE、北美UL认证及各国认证代理服务；

•       Consulting services:technical support during the development anddebugging stages

•       Validation test services:the related testing and evaluationaccording to the standards

•       Approval service:CE,UL and your required certification in eachcountry

北美充电桩认证标准介绍

Standards introduction for Charging station in NorthAmerican

•NFPA 70– NationalElectrical Code (NEC), Article 625 addressing Electric VehicleCharging System

• ANSI/UL 2202 – Standardfor Electric Vehicle (EV) Charging System Equipment (AC toDC)

• ANSI/UL 2231-1* –Standard for Safety for Personnel Protection Systems for ElectricVehicle (EV) Supply Circuits: General

Requirements (referred toin UL 2202 / UL 2594)

• ANSI/UL 2231-2* –Standard for Safety for Personnel Protection Systems for ElectricVehicle (EV) Supply Circuits: Particular

Requirements forProtection Devices for Use in Charging Systems (referred to in UL2202 / UL 2594)

• ANSI/UL 2594* – Standardfor Electric Vehicle Supply Equipment (AC to DC)

• UL 2750 – WirelessCharging Equipment for Electric Vehicles (inDevelopment)

• ANSI/UL2251* – Electric Vehicle Plugs, Receptacles and Couplers

• UL 1998 – Standard forSoftware in Programmable Components

• UL 991 –Standard for Tests for Safety-Related Controls EmployingSolid-State Devices

欧洲充电桩认证标准介绍

Standards introduction for Charging station inEurope

•IEC61851-1 – Electric VehicleConductive Charging Systems – General Requirements

• IEC61851-21 – Electric Vehicle Conductive Charging Systems – Electricvehicle requirements for conductive connection

to ana.c./d.c. supply

• IEC61851-21-1 – Electric Vehicle Conductive Charging Systems –Electric vehicle on-board charger EMC requirements

forconductive connection to AC/DC supply

• IEC61851-21-2 – Electric Vehicle Conductive Charging Systems Electricvehicle requirements for conductive connection

to an AC/DCsupply - EMC requirements for off board electric vehicle chargingsystems

• IEC61851-23 – Electric Vehicle Conductive Charging System – DCelectric vehicle charging station

• IEC61000-6-1/2/3/4- Electromagnetic compatibility (EMC)