1015G33 PA6三菱商品描述： PA的品种齐全，有PA6、PA66、PAll、PAl2、PA46、PA610、PA612、PAl010等，及其近些年开发设计的半脂环尼龙PA6T和特殊尼龙等许多优良品种。PA塑料是有悠久的历史、主要用途普遍的通用性橡胶制品，2000年全球橡胶制品销售市场分派为PA35%、PC32%、POM11%、PBT1O%、PPO3%、PET2%、UHMWPE2%，性能卓越橡胶制品(PPS丙烯酸树脂、LCP、PEEK、PEI、PESU、PVDF、其他含聚苯硫醚等）2%。
| 尼龙6： | 延展性好，冲击性抗压强度，吸湿比较大 |
| 尼龙66： | 特性好于尼龙6，抗压强度高，耐磨性能好 |
| 尼龙610： | 与尼龙66类似，但吸湿小，弯曲刚度低 |
| 尼龙1010： | 透明色，吸湿小。抗寒性不错。适合制做一般机械零件、减磨耐磨损零件、传动系统零件及其化工厂、家用电器、仪表盘等零件 |
尼龙6的化学物理特点和尼龙66很类似，殊不知，它的溶点较低，并且加工工艺温度范围很宽。它的耐冲击性和抗溶
解性比尼龙66塑胶好些,但吸水性也更强。由于塑料件的很多质量特点都需要遭受吸水性的危害，因而应用尼龙6产品设计时要综合考虑到这一点。为了更好地提升尼龙6的机械设备特点，常常添加各式各样的改性材料。玻璃纤维便是多见的添加物，有时候为了更好地提升耐冲击性还添加丁苯橡胶，如EPDM和SBR等。针对沒有添加物的商品，尼龙6塑料原料的缩水率在1%到1.5%中间。
The chemical and physical properties of nylon 6 are very similarto those of nylon 66. However, its melting point is low and theprocess temperature range is wide. Its impact resistance andsolution resistance
The hydrolytic property is better than that of nylon 66 plastic,but the moisture absorption is also stronger. Because many stics of plastic parts are affected by moistureabsorption, this should be fully considered when designing productswith nylon 6. In order to improve the mechanical properties ofnylon 6, various modifiers are often added. Glass fiber is the mostcommon additive. Sometimes synthetic rubber, such as EPDM and SBR,is added to improve impact resistance. For products withoutadditives, the shrinkage of nylon 6 plastic raw materials isbetween 1% and 1.5%.
