CelaneseFORTRON 1140LC6 PPS, 40% Specialty

Polymer,Thermoplastic,Polyphenylene Sulfide (PPS),PolyphenyleneSulfide (PPS) with 40% Glass Fiber Filler

Celanese Corporation

产品说明:

Fortron 1140LC6 is a 40% glass fiber reinforced material with atotal chlorine content less than or equal to 900 ppm*. It offersexcellent physical properties similar to those of the Fortron1140L6 product.
FORTRON should in principle be predried. Because of the necessarylow maximum residual moisture content the use of dry air dryers isrecommended. The dew point should be =< - 30° C. The timebetween drying and processing should be as short as possible.
For subsequent storage the material should be stored dry in thedryer until processed (<= 60 h).

Information provided by Celanese Corporation.

Celanese FORTRON 1140LC6 PPS, 40% Specialty 物性表