菲利普食品级K(Q)胶 KR-05 NW 不含蜡 以喷油 电镀 可印刷K胶食品级SBC
ChevronPhillips K-Resin® KR05NW Styrene-Butadiene Copolymer, Sheet andBlow Mold Grade
Polymer,Thermoplastic,Styrene-Butadiene,Styrene-ButadieneCopolymer, SBC
Chevron Phillips Chemical Company LP
产品说明:
Styrene-Butadiene Copolymer. No wax (NW) form of K-Resin® KR05to facilitate printing.
CustomerBenefits: This SBC is easily processed on blow moldingor extrusion and thermoforming e Finished products haveexcellent clarity, good toughness, good stiffness, high surfacegloss, good formability. KR05NW is the no wax form of KR05 tofacilitate printing and decorating.
Applications: Majorapplications include bottles, profiles, displays, containers, andunblended sheet.
ProcessingRecommendations:
Sheet Extrusion: Melt Temperature, 218°C maximum. High shear andrestrictive type screws tend to degrade the melt. Generally no needto dry resin. Blow Molding: 188-196°C for maximum melt strength.Generally no need to dry resin. Injection Blow Molding: MeltTemperature, 232°C maximum. Generally no need to dry resin.
SpecificationData: FDA Regulation 21 CFR 177.1640. Suitable for foodcontact. EEC Directive 90/128/EEC and all its amendments. USP ClassVI-50. UL 94HB.
Data provided by Chevron Phillips Chemical Company LP.
| K树脂 KR05NW 菲利浦石油国际有限公司物性数据 |
| 暂无此原料描述部分┄ |
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 基本性能 | 密度 | --- | ASTM D-792 | 1.01 | g/cc |
| 熔体流动速率 | 200℃/5kg | ASTM D-1238 | 7.5 | g/10min | |
| 物理性能 | 透光率 | --- | ASTM D-1003 | 90 | % |
| 机械性能 | 肖氏硬度 | --- | ASTM D-2240 | 65 | --- |
| 拉伸屈服强度 | --- | ASTM D-638 | 26 | MPa | |
| 伸长率 | --- | ASTM D-638 | 160 | % | |
| 挠曲模量 | 正割 | ASTM D-790 | 1413 | MPa | |
| 挠曲屈服强度 | --- | ASTM D-790 | 34 | MPa | |
| 艾佐德冲击强度 | --- | ASTM D-256 | 41 | J/m | |
| 热 性 能 | 热变形温度 | --- | ASTM D-648 | 73 | ℃ |
| 维卡软化点 | --- | ASTM D-1525 | 87 | ℃ | |
| 其它性能 | 吸湿率 | 24hr | ASTM D-570 | 0.09 | % |
