PMMA高透明耐热级FT15 PMMA 德国赢创德固赛 FT15 注塑级 流动性特性;聚甲基丙烯酸甲酯含有极性侧甲基，具有较明显的吸湿性，吸水率一般在0.3%-0.4%，成型前必须干燥，干燥条件是80℃-85℃下干燥4-5h。聚甲基丙烯酸甲酯开始流动的温度约160℃，开始分解的温度高于270℃，具有较宽的加工温度区间。聚甲基丙烯酸甲酯熔体粘度较高，冷却速率又较快，制品容易产生内应力，成型时对工艺条件控制要求严格，制品成型后也需要进行后处理。
聚甲基丙烯酸甲酯可以采用浇铸、注塑、挤出、热成型等工艺。
供应PMMA德国赢创德固赛：PMMA|8817，PMMA|8N，PMMA|ZK5BR，PMMA|ZK6BR，PMMA|ZK40；
供应PMMA日本三菱丽阳：PMMA|IR-D30，PMMA|IR-D70，PMMA|IR-H70，PMMA|IRK304，PMMA|VRL40，PMMA|VH，PMMA|VH001；
供应PMMA韩国阿科玛：PMMA|V040，V825；
上海赢创德固赛PMMA：PMMA|7N，PMMA|8N，PMMA|5N，PMMA|6N，PMMA|ZK5BR，PMMA|ZK6BR。
PMMA高透明,PMMA FT15 注塑级, PMMA 德国赢创德固赛,PMMA
ACRYLITE®Heatresist FT15
聚甲基丙烯酸甲酯-丙烯酸
Evonik Cyro LLC
产品说明：
ACRYLITE® Heatresist FT15 polymer is an amorphous thermoplasticmolding and extrusion compound based on polymethyl methacrylate(PMMA).
Typical properties of ACRYLITE® Heatresist acrylic polymersare:
excellent weather resistance
high light transmission
high mechanical strength
high surface hardness and mar resistance
good melt flow rate
versatile colorability due to crystal clarity
The special properties of ACRYLITE® Heatresist FT15 polymerare:
high heat resistance
available in transparent and a range of opaque colors
medium melt flow rate
AMECA listed
Application:
Used for injection molding and extrusion applications.