PA9T G1300A-M41日本可乐丽

PA9T G1300A-M41日本可乐丽----Genestar G1300A-M41为30%玻璃纤维增强注塑级。

G1300A-M41的主要特点是：；

耐热性

耐化学性

应用实例有：；

齿轮和轴承保持架

中冷器油箱和涡轮导管

Main characteristics of PA9T;

The water absorption of nylon resin is the lowest.

2. Dimensional stability will not cause dimensional change andmechanical strength decrease due to water absorption.

High heat resistance, no bubble in tin test, also suitable forhigh temperature lead-free solder.

Good fluidity, suitable for thin meat forming.

5. Low gas, less than other nylon resin, less likely to polluteand corrode the mold, extending the service life of the mold.

6. Fast crystallization and short cooling time.

In the high temperature environment, the mechanical strength andrigidity decrease less, the joint line strength and recovery aregood.

Forming conditions of PA9T;

Melting point: 306 ℃

Recommended barrel temperature: 310 ～ 330 ℃

Glass transition temperature: 125 ℃

Recommended mold temperature 130-150 ℃

1. Drying: 130 ℃ / 3-4 hours

2. Injection temperature: 290 ~ 310 ℃

3. Mold temperature: 130 ～ 150 ℃