PA46 TE250F9荷兰

PA46 TE250F9荷兰---尼龙46 荷兰 TE250F6（）橡胶制品在上取得成功地建立了工业生产上生产制造PA46的方式，
产品名称Stanyl,并在绝大多数我国营销推广的耐高温及耐磨损型的级的丙烯酸树脂46品牌号。注塑成型
1.干躁
完装密封性的纸袋子：不用事先干躁。
经已打开的纸袋子：务必放到有去湿设备的干躁料桶内，在120℃溫度开展4钟头的排风系统干躁。
干躁的時间长度取决于塑胶曝露在湿冷气体的是多少水平。在操作流程中，塑胶务必放到有去湿设备的干躁料桶内，溫度维持在100℃。
2.注塑加工溫度管控
熔融溫度在295℃。理想化的原材料溫度能够在300～315℃。（它包含原材料破裂时个人所得拉申标值及在固支梁下的耐冲击标值IZOD）。
PA46 后段(运输)中区(缩小) 前端(计量检定) 喷头
发觉塑胶随意外溢于炉嘴时，务必把炉嘴溫度降低(自然也必须防备塑胶制冷于炉嘴内)。炉嘴务必压着模版，但如过分压着，也可以适当降低工作压力。

Nylon 46 te250f6 () engineering plastics in the Netherlandssuccessfully established the industrial production method ofPA46,

The product name stanyl, and in most countries promote theheat-resistant and wear-resistant grade polyamide 46 brand number.Injection molding process

1. Drying

Finished sealed paper bag: no need to be pre dried.

Open paper bag: it must be placed in the drying bin withdehumidification device, and the paper bag shall be dried by airexhaust for 4 hours at 120 ℃.

The length of drying is the amount of exposure of plastic tomoist air. During operation, plastic must be placed in a dry binwith dehumidification device, and the temperature shall be kept at100 ℃.

2. injection temperature control

The melting temperature is 295 ℃. The ideal temperature ofmaterial can be 300-315 ℃. (it includes the tensile value obtainedwhen the material is broken and Izod under the cantileverbeam).

PA46 rear section (delivery) middle (compression) front section(metering) nozzle

When it is found that the plastic overflows freely from thefurnace nozzle, the temperature of the furnace nozzle must belowered (of course, it is necessary to be careful to prevent theplastic from cooling in the furnace nozzle). In addition, thefurnace mouth must be pressed on the formwork, but if it is toopressed, the pressure can be reduced appropriately.

的目标主要集中在电力和电量的改变上，一方面采取措施降低电网的峰荷时段的电力需求或增加电网的低谷时段的电力需求，以较少的新增装机容量达到系统的电力供需平衡；另一方面，采取措施节省电力系统的发电量，在满足同样的能源服务的节约了社会总资源的耗费