涤纶PA46(TW341)
Telescopic writing this paragraph injection Molding 1. Dry, sealedpaper bag: no need to dry out first. Paper bags already opened:Make sure to place them in a dry bin with a dehumidifier and leavethe exhaust system dry at 120 °C for 4 hours. The duration ofdryness depends on how much of the plastic is exposed to the cold,moist air. In the operation process, the plastic must be placed ina dry materials bucket with dehumidification e, thetemperature is maintained at 100 °C.
【华韵企业PA46耐热】：西班牙帝斯曼 PA46 塑料型号 TS300,TE341 纯环氧树脂
【华韵企业PA46耐热】：西班牙帝斯曼 PA46 塑料型号 TE250F3,TE250F6 玻璃纤维提高阻燃性
【华韵企业PA46耐热】：西班牙帝斯曼 PA46 塑料型号 TE250F8,TE250F9 玻璃纤维提高防火安全V0
【华韵企业PA46耐热】：西班牙帝斯曼 PA46 塑料型号 46HF5050,46HF4130,46HF4530玻璃纤维提高
【华韵企业PA46耐热】：西班牙帝斯曼 PA46 塑料型号 TW241F3,TW241F6 玻璃纤维提高
【华韵企业PA46耐热】：西班牙帝斯曼 PA46 塑料型号 TW241F8,TW241F10,TW241F12玻璃纤维提高
【华韵企业PA46耐热】：西班牙帝斯曼 PA46 塑料型号 TS350,TS200F6,TS256F6 防火安全V0
【华韵企业PA46耐热】：西班牙帝斯曼 PA46 塑料型号 TC153,TC154 TC551 传热阻燃性级
【华韵企业PA46耐热】：西班牙帝斯曼 PA46 塑料型号 TW271B3,TW271B6碳纤维材料提高导电性
2. Injectionprocessing temperature control, melting temperature at 295 °C. Theideal raw material temperature can be 300 ~ 315 °C. (it includesthe tensile value obtained by the individual when the raw materialis broken and the impact resistance value IZOD under the fixedbeam) . PA46 rear section (transportation) Middle Section(reduction) Front End (metrological verification) nozzle, nochemical fiber structure reinforcement 285 ~ 300290 ~ 305295 ~310295 ~ 310(mold temperature) with chemical fiber structurereinforcement 285 ~ 305295 ~ 310300 ~ 315300 ~ 315(moldtemperature) found plastic accidentally spilled in the nozzle, besure to lower the nozzle temperature (and of course be careful toprevent plastic from cooling inside the nozzle) . In addition, thenozzle must be pressed template, but if too much pressure, you canalso reduce the work pressure. 3. Residence time, in order to avoidserious reduction of plastic properties in the operation process.PA46:6-10 minutes without chemical fiber structure reinforcement,PA46:5 minutes with chemical fiber structure reinforcement toprevent the application of large space plastic machine, relative tothe volume of the finished product. Residence time = cycle time(the volume of the furnace tube that can be contained/volume of thefinished product)4. The temperature of Mussel is suggested to beapplied at 80 ~ 140 °C. Applications, ELECTRICAL E ANDELECTRONIC DEVICES: SMD components, connectors, disconnectors,winding components, motor components and electrical components; LBand components: Transmission Gears, rolling bearings and ballbearing enclosures for vehicle applications: sensors and radiofrequency connectors, such as: Motor automatic control system, airintake machine e, cable standards, DC motor and startercomponents; And the pump body of its exhaust pipe control andauxiliary gas path system software. PA46 has this outstandingcharacteristics, is being accepted by more and more customers,slowly replaced PPS, PA-6T, 9t, SPS, PCT and LCP.