PA66+PTFE铁氟龙沙伯基础
PA66基础创新塑料(美国)RL
PA66基础创新塑料(美国)RL003 BK8115USB
PA66基础创新塑料(美国)RL-004
PA66基础创新塑料(美国)RL004S
PA66基础创新塑料(美国)RL-4010
PA66基础创新塑料(美国)RL4010 FR
PA66基础创新塑料(美国)RL-4020
PA66基础创新塑料(美国)RL-4030 BK
PA66基础创新塑料(美国)RL-4040
PA66基础创新塑料(美国)RL-4040 BK8-115
PA66基础创新塑料(美国)RL-4040HS
PA66基础创新塑料(美国)RL-4080
PA66基础创新塑料(美国)RL-4410
PA66基础创新塑料(美国)RL-4540
PA66基础创新塑料(美国)RL-4540 BK
东莞华韵塑料PA66产品有:
*1、PA66+10%CF(10%碳纤维增强):耐磨、高刚性、导电;
*2、PA66+20%CF(20%碳纤维增强):耐磨、高刚性、导电;
*3、PA66+30%CF(30%碳纤维增强):耐磨、高刚性、导电;
*4、PA66+5%MOS2二硫化钼;
*5、PA66+15%GP石墨:耐磨、导电、低噪音;
*6、PA66+20%PTFE聚四氟乙烯/铁氟龙:耐磨,润滑
*7、PA66+30%GF(玻纤)+15%PTFE(铁氟龙):自润滑、低摩擦,高耐磨;
*8、PA66+30%GF(玻纤)+PTFE(铁氟龙)+GP(石墨):自润滑、超耐磨;
*9、PA66+PTFE(铁氟龙)+GP(石墨):自润滑、超耐磨;
*10、PA66+GF+CF+PTFE(20%玻纤+20%碳纤+铁氟龙);
*11、PA66+MoS2+PTFE(20%二硫化钼+铁氟龙)
Nylon Resin AMILAN TM technical information | injection molding |poor line formation and inadequate filling of shortshot,orshortolded I. The phenomenon that the mold is not filled in thefemale mold so that the molding is incomplete II. The reason isthat the performance of the injection molding machine is not enoughfor the injection capacity and the plastic ability. Poor ExhaustIII. Countermeasures to increase material supply. If the capacityis insufficient, it is necessary to install a large injectionmolding machine with anti-reverse valve screw to increase injectionpressure to raise the barrel temperature setting point. The nozzletemperature also needs to be raised. Verify that the heater isconnected to the power supply nozzle plug or fre occurrednozzle plug situation, raise mold temperature or accelerateinjection molding cycle. Speed up the ascent. Raise moldtemperature. Increase The die exhaust. Increase Gatecross-sectional area. Increase the thickness of the molded part. Inorder to enhance the flow performance of the molded part, the moldadds stiffeners. Choose low viscosity and high fluidity materialsto coat the surface with lubricant. The addition rate is in therange of 0.05 ~ 0.1% for the corrugated flow mark