PP金发柔顺剂增柔剂专用驻级母粒料
PP应用范围
汽车工业（主要使用含金属添加剂的PP：挡泥板、通风管、风扇等），器械（洗碗机门衬垫、干燥机通风管、洗衣机框架及机盖、冰箱门衬垫等），日用消费品（草坪和园艺设备如剪草机和喷水器等）。
1、化学化工储罐制造加工
2、高酸碱溶液储存器
3、处理设备建材
4、电子电镀设备容器
5、实验设备及器皿
6、通用加工仪器设备
7、洗涤器，空气过滤系统，导管系统
8、废气处理洗涤系统
9、电路印刷板酸洗设备
10、电镀槽
11、医疗应用元件
12、电脑数字加工中心及精密设备元件
PP MOLDING PROPERTIES 1. Crystalline material, hygroscopicity, easyto occur melt cracking, long-term contact with hot metal easy todecompose. Good fluidity, but the shrinkage range and shrinkagevalue, prone to occur shrinkage hole. DENTS, deformations. Coolingspeed, pouring system and cooling system should slowly heat, andpay attention to control molding temperature. The direction of lowtemperature is obvious. When the mold temperature is lower than 50degrees, the plastic parts are not smooth, easy to produce badfusion, leaving marks, more than 90 degrees prone to warpagedeformation. 4. Plastic Wall thickness must be uniform, to avoidlack of glue, Sharp Angle, to prevent stress concentrations frombreaking down under certain conditions. Common products: Basin,bucket, furniture, film, woven bag, bottle cap, car bumper and soon.