PBT台湾新光黑色料
PBT日本东丽：1101G-30,1401X06,1401X34,310SEO-1001,DR48-111,DR48-7001；
PBT台湾新光：30%玻纤强化防火级D202G30,E202G30,1403G6,D202G30；
PBT台湾新光：15%玻纤强化防火级D202G15,E202G15,D202G15；
PBT台湾新光：3803,3883,4883,4886,5115,5130,5630,6730；
PBT台湾新光：1120G6,D201,F201,D201G30；
PBT台湾长春：阻燃V-0级4115,4815（玻纤15%）,4120,4820（玻纤20%）；
PBT台湾长春：阻燃V-0级4130,4830（玻纤30%）,4140（玻纤40%）；
PBT台湾长春：阻燃级1100-211M；一般级1100；
PBT日本宝理：玻纤增强难燃级 70G15,70G20,70G30(GF15%,20%,30%)；
PBT日本宝理：玻纤增强阻燃V-0级 3116,3216,3226,3316（GF7.5,15%,20%,30%）；
PBT日本三菱：5010GT15,5010GN1-30；
PBT德国巴斯夫：玻纤增强阻燃级B4406G4,B4406G6；
PBT德国巴斯夫：中粘度食品级B4500（FDA认证）。
The physicochemical properties of PBT are opalescent, translucentto opaque, crystalline thermoplastic polyester. With high heatresistance, toughness, fatigue resistance, self-lubrication, lowfriction PBT COEFFICIENT, low weather resistance, water absorptionrate, only 0.1% , in a humid environment still maintain a varietyof physical properties (including electrical properties) ,electrical insulation, but the volume resistance, dielectric lossis large. Resistant to hot water, Alkali, acid, oil, but vulnerableto halogenated hydrocarbon erosion, poor resistance to hydrolysis,low temperature crystallization can be rapid, good formability. Thedisadvantage is the notch impact strength is low, moldingshrinkage. Therefore, most of the glass fiber reinforced orinorganic filler modification, its tensile strength, bendingstrength can be increased by more than one time, thermaldeformation temperature is also greatly increased. It can work at140 °C for a long time, and the Longitudinal and transverseshrinkage of glass fiber reinforced products are not consistent,and the products are easy to warp.