BASF Ultrason E 2010 PES 物性表
物理性能额定值 (公制)额定值 (英制)测试方法密度1.37 g/cc0.0495 lb/in³ISO 1183吸水率2.2 %2.2%ISO 62平衡吸湿0.80 %0.80 %23°C/50% R.H.; ISO 62粘度测试56 cm³/g56cm³/gViscosity number线性成型收缩率,Flow0.0082 cm/cm0.0082 in/inISO294线性成型收缩率，横向0.0086 cm/cm0.0086 in/inISO 294熔体流动速率70 g/10 min@Load 10.0 kg, Temperature 360 °C
70 g/10 min@Load 22.0 lb, Temperature 680 °F
ISO 1133机械性能额定值 (公制)额定值 (英制)测试方法球压硬度154 MPa22300 psiISO2039-1抗张强度(断裂)90.0 MPa13100 psi5mm/min; ISO 527-2抗张强度(屈服)90.0MPa13100 psi50mm/min; ISO 527-2伸长率 (断裂)6.7 %6.7 %5mm/min; ISO527-2屈服伸长率6.7 %6.7 %50mm/min; ISO 527-2弹性模量2.50 GPa@Temperature 60.0 °C
363 ksi@Temperature 140 °F
ISO 527拉伸模量2.70 GPa392 ksiISO 527-2弯曲强度131 MPa19000 psiISOData弯曲模量2.60 GPa377 ksiASTM Test2.86 GPa415 ksiISO DataFatigue Strength5.00 MPa
@# of Cycles 1.00e+7 , Temperature 180 °C
725 psi@# of Cycles 1.00e+7 , Temperature 356 °F
7.00 MPa
@# of Cycles 1.00e+6 , Temperature 180 °C
1020 psi@# of Cycles 1.00e+6 , Temperature 356 °F
9.00 MPa
@# of Cycles 100000 , Temperature 180 °C
1310 psi@# of Cycles 100000 , Temperature 356 °F
12.0 MPa
@# of Cycles 10000 , Temperature 180 °C
1740 psi@# of Cycles 10000 , Temperature 356 °F
22.0 MPa
@# of Cycles 1.00e+7
3190 psi@# of Cycles 1.00e+7
25.0 MPa
@# of Cycles 100000
3630 psi@# of Cycles 100000
35.0 MPa
@# of Cycles 100000
5080 psi@# of Cycles 100000
55.0 MPa
@# of Cycles 10000
7980 psi@# of Cycles 10000
剪切模量0.200 GPa
@Temperature 225 °C
29.0 ksi@Temperature 437 °F
ISO 67210.900 GPa
@Temperature 200 °C
131 ksi@Temperature 392 °F
ISO 67210.950 GPa
@Temperature 100 °C
138 ksi@Temperature 212 °F
ISO 67211.00 GPa
@Temperature 50.0 °C
145 ksi@Temperature 122 °F
ISO 6721悬壁梁缺口冲击强度6.50 kJ/m²3.09 ft-lb/in²ISO 180/A7.00 kJ/m²
@Temperature -30.0 °C
3.33 ft-lb/in²@Temperature -22.0 °F
ISO 180/A简支梁无缺口冲击强度NBNBISO 179/1eUNB
@Temperature -30.0 °C
NB@Temperature -22.0 °F
ISO 179/1eU简支梁缺口冲击强度0.650 J/cm²3.09 ft-lb/in²ISO 179/1eA0.700 J/cm²
@Temperature -30.0 °C
ISO 179/1eA拉伸蠕变模量(1000 hr)2700 MPa392000 psielongation <0.5%,23°C; ISO 899电气性能额定值 (公制)额定值 (英制)测试方法体积电阻率>= 1.00e+13ohm-cm>= 1.00e+13 ohm-cmIEC 60093表面电阻>= 1.00e+14 ohm>=1.00e+14 ohmIEC 60093介电常数3.8@Frequency 1.00e+6 Hz
3.8@Frequency 1.00e+6 Hz
IEC 602503.9
@Frequency 100 Hz
3.9@Frequency 100 Hz
IEC 60250介电强度37.0 kV/mm940 kV/inIEC 60243-1耗散因数0.0017@Frequency 100 Hz
0.0017@Frequency 100 Hz
IEC 602500.014
@Frequency 1.00e+6 Hz
0.014@Frequency 1.00e+6 Hz
IEC 60250相比耐漏电起痕指数(CTI)125 V125 VTest Liquid A & B; IEC 60112热性能额定值(公制)额定值 (英制)测试方法线性热膨胀系数50.0 µm/m-°C@Temperature -26.0 °C
27.8 µin/in-°F@Temperature -14.8 °F
DIN 5375254.0 µm/m-°C
@Temperature 75.0 °C
30.0 µin/in-°F@Temperature 167 °F
DIN 5375260.0 µm/m-°C
@Temperature 175 °C
33.3 µin/in-°F@Temperature 347 °F
DIN 53752线形热膨胀系数 - 流动52.0 µm/m-°C28.9 µin/in-°FISO 11359-1/-259.0 µm/m-°C32.8 µin/in-°FISO 11359-1/-2比热容1.00 J/g-°C0.239BTU/lb-°F
导热系数0.190 W/m-K1.32 BTU-in/hr-ft²-°FDIN 52612-1高工作温度, Air220 °C428°F
载荷下热变形温度(0.46 MPa)218 °C424 °FISO 75-2载荷下热变形温度(1.8 MPa)205 °C401°FISO 75-2玻璃化转变温度，Tg225 °C437 °FISO 11357-1/-3UL RTI190 °C374 °F50%decrease of tensile strength after 20000h; 746B可燃性(UL94)V-0
@Thickness 3.20 mm
V-0@Thickness 0.126 in
V-0
@Thickness 1.60 mm
V-0@Thickness 0.0630 in
5VA
@Thickness >=3.00 mm
5VA@Thickness >=0.118 in
极限氧指数38 %38 %ISO 4589-1/-2灼热丝试验825 °C1520 °FIgnition Temperature;IEC 60695-2-13
960 °C1760 °FFlammability Index; IEC 60695-2-12光学性能额定值 (公制)额定值(英制)测试方法折射率1.651.65
Transmission, Visible88 %
@Thickness 50.8 mm
88 %@Thickness 2.00 in
ASTM D 100330 %
@Wavelength 350 nm
30 %@Wavelength 350 nm
72 %
@Wavelength 400 nm
72 %@Wavelength 400 nm
81 %
@Wavelength 500 nm
81 %@Wavelength 500 nm
85 %
@Wavelength 600 nm
85 %@Wavelength 600 nm
紫外线透过率2.0 %
@Wavelength 300 nm
2.0 %@Wavelength 300 nm
15 %
@Wavelength 200 nm
15 %@Wavelength 200 nm
加工性能额定值 (公制)额定值 (英制)测试方法加工（熔体）温度340 - 390 °C644 - 734 °FInjectionmolding模具温度140 - 180 °C284 - 356 °FInjection molding
