管件门窗片材型材pmma Plexiglas 8H 良好的着色性
PMMM的简介:
PMMA-聚甲基丙烯酸甲酯,以丙烯酸及其酯类聚合所得到的聚合物统称丙烯酸类树酯,相应的塑料统称聚丙烯酸类塑料,其中以聚甲基丙烯酸甲酯应用广泛。聚甲基丙烯酸甲酯缩写代号为PMMA,俗称有机玻璃,是迄今为止合成透明材料中质地优异,价格又比较适宜的品种。应用方面:PMMA溶于有机溶剂,如苯酚,苯甲醚等,通过旋涂可以形成良好的薄膜,具有良好的介电性能,可以作为有机场效应管(OFET)亦称有机薄膜晶体管(OTFT)的介质层。PMMA树脂是无毒环保的材料,可用于生产餐具,卫生洁具等,具有良好的化学稳定性、和耐候性。PMMA树脂在破碎时不易产生尖锐的碎片,美国、日本等国家和地区已在法律中作出强制性规定,中小学及幼儿园建筑用玻璃必须采用PMMA树脂。全国各地加快了城市建设步伐,街头标志、广告灯箱和电话亭等大量出现,其中所用材料中有相当一部分是PMMA树脂。北京奥运工程的户外彩色建材也大量使用了绿色环保的PMMA树脂。
Plexiglas®8H
聚甲基丙烯酸甲酯-丙烯酸
Evonik Industries AG
产品说明:
Product Profile:
PLEXIGLAS® 8H is an amorphous thermoplastic molding compound(PMMA).
Typical properties of PLEXIGLAS® molding compounds are:
good flow
high mechanical strength, surface hardness and marresistance
high light transmission
very good weather resistance
free colorability due to crystal clarity.
Special properties of PLEXIGLAS® 8H molding compound are:
optimum mechanical properties
increased heat deflection temperature
high melt strength
AMECA listing.
Application:
Used for extruding optical and technical profiles and sheets.
Examples:
sheets, tubes, multi-skin sheets, coextrusion of window profilesand similar applications
Processing:
PLEXIGLAS® 8H can be processed on extruders with 3-zone generalpurpose screws for engineering thermoplastics.
Physical Form / Packaging:
PLEXIGLAS® molding compounds are supplied as pellets of uniformsize, packaged in 25kg polyethylene bags or in 500kg boxes with PElining; other packaging on request.
Plexiglas® 8H 物性表
基本信息 | |
---|---|
黄卡编号 |
|
特性 |
|
用途 |
|
形式 |
|
加工方法 |
|
多点数据 |
|
物理性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
密度 | 1.19 | g/cm³ | ISO 1183 |
溶化体积流率(MVR) (230°C/3.8 kg) | 0.800 | cm³/10min | ISO 1133 |
机械性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
拉伸模量 | 3300 | MPa | ISO 527-2/1 |
拉伸应力 (断裂) | 78.0 | MPa | ISO 527-2/5 |
拉伸应变 (断裂) | 6.5 | % | ISO 527-2/5 |
冲击性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
简支梁无缺口冲击强度 (23°C) | 20 | kJ/m² | ISO 179/1eU |
热性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
维卡软化温度 | 108 | °C | ISO 306/B50 |
线形热膨胀系数 - 流动 (0 到 50°C) | 8.0E-5 | cm/cm/°C | ISO 11359-2 |
可燃性 | 额定值 | 测试方法 | |
---|---|---|---|
UL 阻燃等级 (1.60 mm) | HB | UL 94 | |
Fire Rating | B2 | DIN 4102 |
光学性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
折射率 | 1.490 | ISO 489 | |
透射率 1 | 92.0 | % | ISO 13468-2 |
挤出 | 额定值 | 单位制 | |
---|---|---|---|
干燥温度 | < 98.0 | °C | |
干燥时间 | 2.0 到 3.0 | hr | |
熔体温度 | 220 到 260 | °C | |
口模温度 | 220 到 260 | °C |
备注 |
---|
管件门窗片材型材,pmma Plexiglas 8H ,良好的着色性pmma,pmma透镜生产制造
特点:EvonikIndustries AG Plexiglas PMMA 8H 是一款用于管道,门窗,片材,型材的聚甲基丙烯酸甲酯-丙烯酸材料。
PMMA8H 抗应力裂纹,耐气候影响
Plexiglas®PMMA 8H
聚甲基丙烯酸甲酯-丙烯酸
EvonikIndustries AG
产品说明
ProductProfile:
PLEXIGLAS®8H is an amorphous thermoplastic molding compound(PMMA).
Typicalproperties of PLEXIGLAS® molding compounds are:
﹒goodflow
﹒highmechanical strength, surface hardness and mar resistance
﹒highlight transmission
﹒verygood weather resistance
﹒freecolorability due to crystal clarity.
Specialproperties of PLEXIGLAS® 8H molding compound are:
﹒optimummechanical properties
﹒increasedheat deflection temperature
﹒highmelt strength
﹒AMECAlisting.
Application:
Usedfor extruding optical and technical profiles and sheets.
Examples:
sheets,tubes, multi-skin sheets, coextrusion of window profiles andsimilar applications
Processing:
PLEXIGLAS®8H can be processed on extruders with 3-zone general purpose screwsfor engineering thermoplastics.
PhysicalForm / Packaging:
PLEXIGLAS®molding compounds are supplied as pellets of uniform size, packagedin 25kg polyethylene bags or in 500kg boxes with PE lining; otherpackaging on request.
UL黄卡2:E65495-247805
材料特点:HighHardness,高ESCR(抗应力裂纹),流动性良好,良好的熔体强度,易着颜色,耐气候影响
材料用途:管道,门窗,片材,型材
产品形式:颗粒料
加工方法:共挤出成型,挤出
定属记号:丙烯酸(PMMA)
塑料牌号:PMMA8H